top of page


Public·8 members

Gv 1480 Windows 7 Driver

Gv 1480 Windows 7 Driver - How to Install and Use GeoVision GV-1480B Combo Card

If you are looking for a high-performance video capture card that can support up to 16 cameras and 16 audio channels, you might want to consider the GeoVision GV-1480B Combo Card. This card is designed to work with Windows 7 and other operating systems, and it offers various features such as Geo MPEG4 and Geo H264 compression, multi-quad card support, loop-through card support, and more. In this article, we will show you how to install and use the GV-1480B Combo Card on your Windows 7 computer.

Gv 1480 Windows 7 Driver


How to Install the GV-1480B Combo Card

Before you install the GV-1480B Combo Card, you need to make sure that your computer meets the minimum system requirements for one card or two cards, depending on how many cards you want to use. You can find the system requirements on the [GeoVision website]. You also need to have a PCI-E (x4) slot available on your motherboard.

Here are the steps to install the GV-1480B Combo Card:

  • Turn off your computer and unplug the power cord.

  • Open the computer case and locate an empty PCI-E (x4) slot on your motherboard.

  • Remove the metal bracket from the slot and insert the GV-1480B Combo Card into the slot. Make sure that the card is firmly seated and secured with a screw.

  • Connect the DVI cable from the card to your monitor.

  • Connect the cameras and audio devices to the BNC connectors on the card. You can use up to 16 cameras and 16 audio channels per card.

  • If you want to use another GV-1480B Combo Card, repeat steps 2 to 5 for another PCI-E (x4) slot.

  • Close the computer case and plug in the power cord.

  • Turn on your computer and wait for Windows 7 to detect the new hardware.

How to Use the GV-1480B Combo Card

To use the GV-1480B Combo Card, you need to install the GeoVision Main System software and drivers. You can download them from the [GeoVision website]. You can also find other useful software and manuals there, such as MultiView, Remote ViewLog, Center V2, etc.

Here are the steps to use the GV-1480B Combo Card:

  • Download and unzip the GeoVision Main System software and drivers from the [GeoVision website].

  • Run the Setup.exe file and follow the instructions on the screen. You will need to restart your computer after the installation is complete.

  • After restarting your computer, run the GeoVision Main System software from the Start menu or desktop shortcut. You will see a login window where you can enter your username and password. The default username is admin and the default password is 1234.

  • After logging in, you will see the main interface of the GeoVision Main System software. You can configure various settings such as video resolution, recording rate, display rate, compression format, motion detection, etc. You can also view live video from your cameras, playback recorded video, backup video files, etc.

  • If you want to access your cameras remotely from another computer or mobile device, you need to set up some network settings such as port forwarding, DDNS, etc. You can find more information on how to do that in the [GeoVision manuals].

We hope this article has helped you learn how to install and use the GV-1480 Windows 7 Driver for your GeoVision GV-1480B Combo Card. If you have any questions or problems, please contact [GeoVision support] for assistance.


Welcome to the group! You can connect with other members, ge...


Group Page: Groups_SingleGroup
bottom of page